Showing 1–10 of 10 posts

LC-MS Detection

The figure below provides a block diagram of a typical liquid chromatography-mass spectrometer (LS–MS) instrument. As illustrated here, a three component mixture is injected onto the HPLC. When component A elutes from the column, […]

GC-MS

The figure below provides a block diagram of a typical gas chromatography-mass spectrometer (GC–MS) instrument. As illustrated here, a three component mixture enters the GC. When component A elutes from the column, it enters […]

Electron Capture Detector

Shown here is a schematic diagram of electron capture detector (ECD) for gas chromatography. The detector consists of a β-emitter, such as 63Ni. The emitted electrons ionize the mobile phase, which is […]

Flame Ionization Detector

The schematic diagram below shows a flame ionization detector for gas chromatography. The eluent from the column mixes with H2 and is burned in the presence of excess air. Combustion of organic […]

Thermal Conductivity Detector

One of the earliest gas chromatography detectors takes advantage of the mobile phase’s thermal conductivity. As the mobile phase exits the column it passes over a tungsten-rhenium wire filament (see figure below). […]

Photomultiplier Detector

A photomultiplier contains a photosensitive surface that absorbs radiation in the ultraviolet, visible, or near IR, producing an electrical current proportional to the number of photons reaching the photomultiplier. As shown here, […]