Showing 13–24 of 46 posts

HPLC Pumps

A typical HPLC includes between 1–4 reservoirs for mobile phase solvents. The mobile phase solvents are pulled from their reservoirs by the action of one or more pumps. Shown here is a close-up […]

HPLC Column

The most common type of HPLC column is a stainless steel tube with an internal diameter between 2.1 mm and 4.6 mm and a length between 30 mm and 300 mm. The […]

HPLC Instrumentation

The photo below shows an example of a typical HPLC instrument with insets showing close-up views of the pumps that move the mobile phase through the system, and the plumbing used to inject […]

GC-MS

The figure below provides a block diagram of a typical gas chromatography-mass spectrometer (GC–MS) instrument. As illustrated here, a three component mixture enters the GC. When component A elutes from the column, it enters […]

Electron Capture Detector

Shown here is a schematic diagram of electron capture detector (ECD) for gas chromatography. The detector consists of a β-emitter, such as 63Ni. The emitted electrons ionize the mobile phase, which is […]

Flame Ionization Detector

The schematic diagram below shows a flame ionization detector for gas chromatography. The eluent from the column mixes with H2 and is burned in the presence of excess air. Combustion of organic […]

Thermal Conductivity Detector

One of the earliest gas chromatography detectors takes advantage of the mobile phase’s thermal conductivity. As the mobile phase exits the column it passes over a tungsten-rhenium wire filament (see figure below). […]