Explore resources, experiments, and teaching materials shared by the analytical sciences community.
Flame emission is subject to the same types of chemical interferences as atomic absorption. These interferences are minimized by adjusting the flame’s composition and adding protecting agents, releasing agents, or ionization suppressors. […]
The most important spectral interference in emission spectroscopy is broad, background emission from the flame or plasma, and emission bands from molecular species. This background emission is particularly severe for flames because […]
The illustration below provides a schematic diagram of an inductively coupled plasma source (ICP), which consists of three concentric quartz tubes surrounded at the top by a radio-frequency induction coil. The sample […]
Illustration showing how slit orientation changes the volume from which fluorescence is measured: (a) vertical slit orientation; (b) horizontal slit orientation. Suppose each slit’s dimensions are 0.1 mm × 3 mm. In […]
Except for a few metal ions, most notably UO2+, most inorganic ions are not sufficiently fluorescent for a direct analysis. Many metal ions may be determined indirectly by reacting with an organic […]
The basic instrumentation for monitoring fluorescence and phosphorescence—a source of radiation, a means of selecting a narrow band of radiation, and a detector—are the same as those for absorption spectroscopy. The unique […]
A photoluminescence spectrum is recorded by measuring emission intensity as a function of either the excitation wavelength or the emission wavelength. An excitation spectrum is obtained by monitoring emission at a fixed […]
Shown here is an illustration of the energy level diagram for a molecule exhibiting pathways for the deactivation of an excited state: vr is vibrational relaxation; ic is internal conversion; ec is […]
Photoluminescence is divided into two categories: fluorescence and phosphorescence. A pair of electrons occupying the same electronic ground state have opposite spins and are said to be in a singlet spin state; […]
The photo below shows a typical multielemental hollow cathode lamp. The cathode in this lamp is fashioned from an alloy containing Co, Cr, Cu, Fe, Mn, and Ni, and is surrounded by […]
A typical electrothermal atomizer, also known as a graphite furnace, consists of a cylindrical graphite tube approximately 1–3 cm in length and 3–8 mm in diameter. As shown here, the graphite tube […]
The illustration below shows a cross-section through a typical flame looking down the burner’s slot along the source radiation’s optical path. The primary combustion zone is usually rich in gas combustion products that […]
